View QPB1500_8974495.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

QPB1500 ku-band 25 w gan power amplifier data sheet rev. a, june 26, 2017 - 1 of 14 - www.qorvo.com product description qorvo?s QPB1500 is a packaged 25 w power amplifier operating over the 14.85 ghz to 15.75 ghz band. the active device is fabricated on qorvo?s 0.15 um gan on sic technology. the QPB1500 offers > 30 db small- signal gain with saturated output power of 44 dbm and pae of 35 % for operation in the middle of ku-band. the QPB1500 is offered in a 10 pin leadless bolt-do wn package. assembled with a pure copper base, coupled with its high efficiency, the QPB1500 minimizes the stra in on system-level cooling requirements. superior electri cal performance and thermal management makes the QPB1500 ideal for supporting communication applications in both commercial and military applications. both rf ports are dc blocked and are fully matched to 50 ohms. lead free and rohs compliant. ordering information part no. eccn description QPB1500 ear99 ku-band 25 w gan pa module QPB1500s2 ear99 box (2 samples each) QPB1500pcb4b01 ear99 evaluation board functional block diagram product features ? frequency range: 14.85 ? ? ? 15.75 ghz ? p out (p in = 20 dbm): 44 dbm ? pae (p in = 20 ? dbm): 35% ? power gain (p in = 20 ? dbm): 24 ? db ? im3 (p out /tone = 30 dbm) = ?29 ? dbc ? bias: v d = +28 ? v, i dq = 450 ? ma, v g = ?2.4 ? v typical ? package dimensions: 15.2 x 15.2 x 5.2 ? mm ? package base is pure cu offering superior thermal management ? eccn: ear99 applications ? commercial vsat ? military satcom ? datalinks 12 rf in 3 45 10 9 8 rf out 7 6
QPB1500 ku-band 25 w gan power amplifier data sheet rev. a, june 26, 2017 - 2 of 14 - www.qorvo.com absolute maximum ratings parameter value ? / ? range drain voltage (v d ) 29.5 ? v gate voltage range (v g ) ?5 to 0 ? v drain current (i d ) 7.2 ? a gate current (i g ) see plot page 3 power dissipation (p diss ), 85 ? c 80 ? w input power (p in ) cw, 50 ? , v d = +28 ? v, i dq = 450 ma, 85 ? c 34 ? dbm input power (p in ), cw, vswr 3:1, v d = +28 ? v, i dq = 450 ma, 85 ? c 31 ? dbm channel temperature (t ch ) 275 ? c mounting temperature (30 seconds) 260 ? c storage temperature ?55 to 150 ? c operation of this device outside the parameter rang es given above may cause permanent damage. these are stress ratings only, and functional operation of the device at the se conditions is not implied. recommended operating conditions parameter value ? / ? range drain voltage (v d ) 28 ? v drain current (i dq ) 450 ? ma drain current under rf drive (i d_drive ) see plots page 6 gate voltage (v g ) ?2.5 ? v (typ.) gate current under rf drive (i g_drive ) see plots p. 6 temperature (t base ) ?40 to 85 ? c electrical specifications are measured at specified test conditions. specifications are not guaranteed over all recommended operating conditions. electrical specifications parameter min typ max units operational frequency range 14.85 15.75 ghz small signal gain 33 db input return loss 10 db output return loss 18 db output power (at p in = 20 ? dbm) 44.2 dbm power added efficiency (at p in = 20 ? dbm) 35.5 % power gain (at p in = 20 ? dbm) 24.2 db im3 @ 30 ? dbm/tone -29 dbc output power temperature coefficient (25 ? c to 85 ? c only, p in = 20 ? dbm ) ?0.024 dbm/c test conditions unless otherwise noted: 25 ? c, v d = +20 ? v, i dq = 560 ? ma, v g = ?2.5 ? v typical.
QPB1500 ku-band 25 w gan power amplifier data sheet rev. a, june 26, 2017 - 3 of 14 - www.qorvo.com thermal and reliability information parameter test conditions value units thermal resistance ( jc ) (1) cw, v d = +28 ? v, i dq = 450 ? ma, t base = 85 ? c p diss = 12.8 ? w 2.38 c/w channel temperature (t ch ) (quiescent) 115 c median lifetime (t m ) 5.58e+11 hrs thermal resistance ( jc ) (1) v d = +28 ? v, i dq = 450 ? ma, t base = 85 ? c, freq = 15.15 ? ghz, p in = 20 ? dbm, p out = 42.9 ? dbm, p diss = 41.4 ? w, i d_drive = 2.17 ? a 2.13 c/w channel temperature (t ch ) (under rf drive) 173 c median lifetime (t m ) 7.76e+08 hrs notes: 1. thermal resistance measured to back of package. median lifetime life test conditions: v d = 28 ? v; failure criteria = 10 ? % reduction in id_max during dc life testing 0 10 20 30 40 50 60 70 80 90 100 110 120 125 135 145 155 165 175 185 195 205 215 225 maximum gate current (ma) channel temperature (c) maximum gate current vs. t ch 15 20 25 30 35 40 45 50 55 60 14.25 14.50 14.75 15.00 15.25 15.50 15.75 16.00 16.25 dissipated power (w) frequency (ghz) p diss vs. frequency vs. base temperature -40 c +25 c +85 c p in = 14 dbm p in = 20 dbm p in = 25 dbm
QPB1500 ku-band 25 w gan power amplifier data sheet rev. a, june 26, 2017 - 4 of 14 - www.qorvo.com typical performance ? ? ? large signal conditions unless otherwise specified: v d = 28 ? v, i dq = 450 ? ma, p in = 20 dbm, temp = 25 c 30 32 34 36 38 40 42 44 46 14.25 14.50 14.75 15.00 15.25 15.50 15.75 16.00 16.25 output power (dbm) frequency (ghz) output power vs. frequency vs. voltage 20 v 24 v 28 v 30 32 34 36 38 40 42 44 46 14.25 14.50 14.75 15.00 15.25 15.50 15.75 16.00 16.25 output power (dbm) frequency (ghz) output power vs. frequency vs. temp. -40 c +25 c +85 c p in = 14 dbm p in = 20 dbm p in = 25 dbm 28 30 32 34 36 38 40 42 44 46 2 4 6 8 10 12 14 16 18 20 22 output power (dbm) input power (dbm) output power vs. input power vs. voltage 20 v 24 v 28 v frequency = 15.35 ghz 30 32 34 36 38 40 42 44 46 14.25 14.50 14.75 15.00 15.25 15.50 15.75 16.00 16.25 output power (dbm) frequency (ghz) output power vs. frequency vs. p in 16 dbm 19 dbm 17 dbm 20 dbm 18 dbm 28 30 32 34 36 38 40 42 44 46 2 4 6 8 10 12 14 16 18 20 22 output power (dbm) input power (dbm) output power vs. input power vs. freq. 14.85 ghz 15.75 ghz 15.05 ghz 15.95 ghz 15.35 ghz
QPB1500 ku-band 25 w gan power amplifier data sheet rev. a, june 26, 2017 - 5 of 14 - www.qorvo.com typical performance ? ? ? large signal conditions unless otherwise specified: v d = 28 ? v, i dq = 450 ? ma, p in = 20 dbm, temp = 25 c 10 15 20 25 30 35 40 45 14.25 14.50 14.75 15.00 15.25 15.50 15.75 16.00 16.25 pae (%) frequency (ghz) pae vs. frequency vs. drain voltage 20 v 24 v 28 v 10 15 20 25 30 35 40 45 14.25 14.50 14.75 15.00 15.25 15.50 15.75 16.00 16.25 pae (%) frequency (ghz) pae vs. frequency vs. temperature -40 c +25 c +85 c p in = 14 dbm p in = 20 dbm p in = 25 dbm 0 5 10 15 20 25 30 35 40 45 2 4 6 8 10 12 14 16 18 20 22 pae (%) input power (dbm) pae vs. input power vs. drain voltage 20 v 24 v 28 v frequency = 15.35 ghz 10 15 20 25 30 35 40 45 14.25 14.50 14.75 15.00 15.25 15.50 15.75 16.00 16.25 pae (%) frequency (ghz) pae vs. frequency vs. p in 16 dbm 19 dbm 17 dbm 20 dbm 18 dbm 0 5 10 15 20 25 30 35 40 45 2 4 6 8 10 12 14 16 18 20 22 pae (%) input power (dbm) pae vs. input power vs. frequency 14.85 ghz 15.75 ghz 15.05 ghz 15.95 ghz 15.35 ghz
QPB1500 ku-band 25 w gan power amplifier data sheet rev. a, june 26, 2017 - 6 of 14 - www.qorvo.com typical performance ? ? ? large signal conditions unless otherwise specified: v d = 28 ? v, i dq = 450 ? ma, p in = 20 dbm, temp = 25 c 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 14.25 14.50 14.75 15.00 15.25 15.50 15.75 16.00 16.25 drain current (a) frequency (ghz) drain current vs. freq. vs. drain voltage 20 v 24 v 28 v -2.0 -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 14.25 14.50 14.75 15.00 15.25 15.50 15.75 16.00 16.25 gate current (ma) frequency (ghz) gate current vs. freq. vs. drain voltage 20 v 24 v 28 v 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 14.25 14.50 14.75 15.00 15.25 15.50 15.75 16.00 16.25 drain current (a) frequency (ghz) drain current vs. freqency vs. temp. -40 c +25 c +85 c p in = 14 dbm p in = 20 dbm p in = 25 dbm -2.0 -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 14.25 14.50 14.75 15.00 15.25 15.50 15.75 16.00 16.25 gate current (ma) frequency (ghz) gate current vs. freqency vs. temp. -40 c +25 c +85 c p in = 14 dbm p in = 20 dbm p in = 25 dbm 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 2 4 6 8 10 12 14 16 18 20 22 drain current (a) input power (dbm) drain current vs. input power vs. voltage 20 v 24 v 28 v frequency = 15.35 ghz -2.0 -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 2 4 6 8 10 12 14 16 18 20 22 gate current (ma) input power (dbm) gate current vs. input power vs. voltage 20 v 24 v 28 v frequency = 15.35 ghz
QPB1500 ku-band 25 w gan power amplifier data sheet rev. a, june 26, 2017 - 7 of 14 - www.qorvo.com performance plots ? ? ? large signal conditions unless otherwise specified: v d = 28 ? v, i dq = 450 ? ma, p in = 20 dbm, temp = 25 c 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 2 4 6 8 10 12 14 16 18 20 22 drain current (a) input power (dbm) drain current vs. input power vs. freq. 14.85 ghz 15.75 ghz 15.05 ghz 15.95 ghz 15.35 ghz -2.0 -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 2 4 6 8 10 12 14 16 18 20 22 gate current (ma) input power (dbm) gate current vs. input power vs. freq. 14.85 ghz 15.75 ghz 15.05 ghz 15.95 ghz 15.35 ghz 10 12 14 16 18 20 22 24 26 28 30 14.25 14.50 14.75 15.00 15.25 15.50 15.75 16.00 16.25 power gain (db) frequency (ghz) power gain vs. frequency vs. voltage 20 v 24 v 28 v 10 12 14 16 18 20 22 24 26 28 30 14.25 14.50 14.75 15.00 15.25 15.50 15.75 16.00 16.25 power gain (db) frequency (ghz) power gain vs. frequency vs. p in 16 dbm 19 dbm 17 dbm 20 dbm 18 dbm 10 12 14 16 18 20 22 24 26 28 30 32 34 2 4 6 8 10 12 14 16 18 20 22 power gain (db) input power (dbm) power gain vs. input power vs. freq. 14.85 ghz 15.75 ghz 15.05 ghz 15.95 ghz 15.35 ghz 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 14.25 14.50 14.75 15.00 15.25 15.50 15.75 16.00 16.25 power gain (db) frequency (ghz) power gain vs. frequency vs. temp. -40 c +25 c +85 c p in = 14 dbm p in = 20 dbm p in = 25 dbm
QPB1500 ku-band 25 w gan power amplifier data sheet rev. a, june 26, 2017 - 8 of 14 - www.qorvo.com performance plots ? ? ? linearity conditions unless otherwise specified: v d = 28 ? v, i dq = 450 ? ma, tone separation = 1 mhz, stemp = 25 c -60 -50 -40 -30 -20 -10 0 22 24 26 28 30 32 34 36 38 40 42 im3 (dbc) output power per tone (dbm) im3 vs. output power vs. frequency 15.4 ghz -90 -80 -70 -60 -50 -40 -30 -20 -10 0 22 24 26 28 30 32 34 36 38 40 42 im5 (dbc) output power per tone (dbm) im5 vs. output power vs. frequency 15.4 ghz -60 -50 -40 -30 -20 -10 0 22 24 26 28 30 32 34 36 38 40 42 im3 (dbc) output power per tone (dbm) im3 vs. output power vs. voltage 20 v 24 v 28 v freq. = 15.4 ghz -90 -80 -70 -60 -50 -40 -30 -20 -10 0 22 24 26 28 30 32 34 36 38 40 42 im5 (dbc) output power per tone (dbm) im5 vs. output power vs. voltage 20 v 24 v 28 v freq. = 15.4 ghz -60 -50 -40 -30 -20 -10 0 22 24 26 28 30 32 34 36 38 40 42 im3 (dbc) output power per tone (dbm) im3 vs. output power vs. temperature -40 c +25 c +85 c freq. = 15.4 ghz -90 -80 -70 -60 -50 -40 -30 -20 -10 0 22 24 26 28 30 32 34 36 38 40 42 im5 (dbc) output power per tone (dbm) im5 vs. output power vs. temperature -40 c +25 c +85 c freq. = 15.4 ghz
QPB1500 ku-band 25 w gan power amplifier data sheet rev. a, june 26, 2017 - 9 of 14 - www.qorvo.com performance plots ? ? ? harmonic conditions unless otherwise specified: v d = 28 ? v, i dq = 450 ? ma, temp = 25 c -60 -50 -40 -30 -20 -10 32 33 34 35 36 37 38 39 40 41 42 2nd harmonic (dbc) output power per tone (dbm) 2nd harmonic vs. output power vs. freq. 15.4 ghz -60 -50 -40 -30 -20 -10 26 28 30 32 34 36 38 40 42 2nd harmonic (dbc) output power per tone (dbm) 2nd harmonic vs. output power vs. temp. -40 c +25 c +85 c
QPB1500 ku-band 25 w gan power amplifier data sheet rev. a, june 26, 2017 - 10 of 14 - www.qorvo.com performance plots ? ? ? small signal conditions unless otherwise specified: v d = 28 ? v, i dq = 450 ? ma, temp = 25 c 0 5 10 15 20 25 30 35 40 45 14.0 14.5 15.0 15.5 16.0 16.5 17.0 s21 (db) frequency (ghz) gain vs. frequency vs. temperature - 40 c +25 c +85 c 0 5 10 15 20 25 30 35 40 45 14.0 14.5 15.0 15.5 16.0 16.5 17.0 s21 (db) frequency (ghz) gain vs. frequency vs. drain voltage 20 v 24 v 28 v 0 5 10 15 20 25 30 35 40 45 14.0 14.5 15.0 15.5 16.0 16.5 17.0 s21 (db) frequency (ghz) gain vs. frequency vs. drain current 225 ma 450 ma 675 ma -30 -25 -20 -15 -10 -5 0 14.0 14.5 15.0 15.5 16.0 16.5 17.0 s11 (db) frequency (ghz) input return loss vs. frequency vs. temp. - 40 c +25 c +85 c -30 -25 -20 -15 -10 -5 0 14.0 14.5 15.0 15.5 16.0 16.5 17.0 s22 (db) frequency (ghz) output return loss vs. freqency vs. temp. - 40 c +25 c +85 c
QPB1500 ku-band 25 w gan power amplifier data sheet rev. a, june 26, 2017 - 11 of 14 - www.qorvo.com applications information and pin layout bias up procedure 1. set i d limit to 3.5 a, i g limit to 65 ? ma 2. apply ?5 ? v to v g 3. apply 28 ? v to v d ; ensure i dq is approx. 0 ma 4. adjust v g until i dq = 450 ? ma (v g ~ ?2.5 ? v typ.). 5. turn on rf supply bias down procedure 1. turn off rf supply 2. reduce v g to ?5 ? v; ensure i dq is approx. 0 ? ma 3. set v d to 0 v 4. turn off v d supply 5. turn off v g supply pin description pad no. symbol description 1,5 v g gate voltage; bias network is required; must be bia sed from both sides; see recommended application information above. 3 rf in input; matched to 50 ? ; dc blocked 2,4,7,9 gnd must be grounded on the pcb. 6,10 v d drain voltage; bias network is required; must be bi ased from both sides; see recommended application information above. 8 rf out output; matched to 50 ? ; dc blocked 8 rf out rf in 3 vd c5 10 uf vg r3 5.1 ohms c3 0.01 uf c6 10 uf r4 5.1 ohms c4 0.01 uf c11 10 uf r7 5.1 ohms c12 10 uf r8 5.1 ohms 6 7 9 10 5 4 2 1 c9 0.01 uf c10 0.01 uf
QPB1500 ku-band 25 w gan power amplifier data sheet rev. a, june 26, 2017 - 12 of 14 - www.qorvo.com evaluation board (evb) assembly drawing pcb notes: (1) both top and bottom vd and vg must be biased. bill of materials reference des. value description manuf. part number c3, c4, c9, c10 0.01 uf cap 0.01uf +/-10% 50v 0402 x7r rohs various ? c5, c6, c11, c12 10 uf cap1206, 10uf, 20%, 50v, 20%, x5r various ? r3, r4, r7, r8 5.1 ohm res, 5.1 ohm, 5%, 50v, smt, 0402 various
QPB1500 ku-band 25 w gan power amplifier data sheet rev. a, june 26, 2017 - 13 of 14 - www.qorvo.com assembly notes 1. clean the board or module with alcohol. allow it to dry fully. 2. screws are recommended for mounting the QPB1500 to the t-carrier. 3. to improve the thermal and rf performance, we re commend the following: a. apply 4 ? mils indium shim or thermal compound between the pa ckage and the t-carrier. b. attach a heat sink to the bottom of the t-carrie r and apply 4 ? mils indium shim or thermal compound between the heat sink and the t-carrier. 4. apply solder to each pin of the QPB1500. 5. clean the assembly with alcohol. mechanical information units: inches tolerances: (unless specified) x.xx = 0.01 x.xxx = 0.005 materials: base: copper leads: alloy 194 lid: lcp (liquid crystal polymer) all metalized features are gold plated part is epoxy sealed marking: QPB1500: part number yy: part assembly year ww: part assembly week zzz: serial number (unique for all parts within one assembly lot) mxxx: batch id
QPB1500 ku-band 25 w gan power amplifier data sheet rev. a, june 26, 2017 - 14 of 14 - www.qorvo.com handling precautions parameter rating standard caution! esd-sensitive device esd ? ? ? human body model (hbm) class 0b jedec standard jesd22 a114 esd ? ? ? charge device model (cdm) tbd jedec standard jesd22-c101f msl ? ? ? convection reflow 260 ? c 5a jedec standard ipc/jedec j- std-020. rohs compliance this product is compliant with the 2011/65/eu rohs directive (restrictions on the use of certain hazar dous substances in electrical and electronic equipment), as amended by directive 2015/863/eu. this product also has th e following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp-a (c 15 h 12 br 4 0 2 ) free ? pfos free ? svhc free contact information for the latest specifications, additional product i nformation, worldwide sales and distribution locati ons, and information about qorvo: web: www.qorvo.com tel: +1.972.994.8465 email: info-sales@qorvo.com fax: +1.972.994.8504 for technical questions and application information : email: info-products@qorvo.com important notice the information contained herein is believed to be reliable. qorvo makes no warranties regarding the information contained herein. qorvo assumes no responsibility or liability whatso ever for any of the information contained herein. qorvo assumes no respon sibility or liability whatsoever for the use of the information contained herein. the information contained herei n is provided "as is, where is" and with all faults, and the entire risk associated wit h such information is entirely with the user. all information contained herein is subject to change without notice. customers should obtain and verify the latest relevant information b efore placing orders for qorvo products. the information contained herein or any use of such inf ormation does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life- sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or dea th. solderability compatible with the latest version of j-std-020, le ad-free solder, 260 ? c

▲Up To Search▲

Price & Availability of QPB1500

	To Download QPB1500 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .